Extensions
Catalogue
Find and install modules published by the bench community.
138 modules available
-
surface-mapAdd
Turns raw interferogram exports into an annotated surface map. Use this module whenever a polishing run produces fringe data that still needs Zernike terms fitted and a print-ready figure report attached.
-
tolerance-stackAdd
Builds a tolerance budget from an element list. Handles radius, centre thickness, wedge and decentre limits, then reports both the worst-case sum and the root-sum-square total for the assembly.
-
coating-curveAdd
Reads reflectance sweeps straight off the spectrophotometer and plots them against the target curve. Flags any band that drifts outside the witness specification and writes the deviation back to the run log.
-
blank-ledgerAdd
Tracks glass blanks from boule to finished element. Records melt number, striae grade and the annealing schedule for every batch that leaves the grinding shop, and keeps the paperwork attached to the job.
-
quote-sheetAdd
Drafts a customer quote from a finished drawing. Pulls edging, centring and polish minutes from the shop rate card, applies the current glass surcharge, and lays the result out as a sendable sheet.